In a wood pallet production line, stringer notching is a step you cannot skip. American-style pallets need four-way forklift entry, and the notches cut into the stringers determine whether a forklift can move smoothly and whether the pallet survives repeated handling. The market offers everything from single-head to double-head machines, semi-automatic to fully automatic, with wide differences in price and output. This guide pulls the scattered information together: how a stringer notcher works, what its key parts do, what benefits it actually delivers, and how to match a specific model to your production scenario.

Double Head Pallet Stringer Notcher

What a Stringer Notcher Actually Solves

Pallet stringers are the primary load-bearing components running parallel to the longer sides of a pallet. Notches are cut into these stringers to give forklift tines or pallet jacks an entry point. Without them, a forklift can only enter from certain directions, handling efficiency drops sharply, and the stringer edges get damaged by repeated fork impact.

A stringer notcher is the machine built for this job. Using circular saw blades, router tools, or dedicated notching inserts, it cuts consistent notches into stringers. Compared with manual cutting with a Sawzall or hand saw, machine notching is in a different league for consistency, speed, and safety.

pallet stringer notcher icon

Key Components and Step-by-Step Operation

A typical stringer notcher includes the following:

Feed table — where stringers are placed and fed into the machine. Some models use a magazine-style design that holds multiple stringers and advances them automatically.

Clamps and stops — these secure and align the stringer during notching. The stop determines notch position; the clamp prevents the wood from moving or kicking back during cutting.

Notching heads — the core cutting assembly, holding saw blades or notching inserts. The heads move up and down or in and out to engage the stringer at the set depth. On double-head machines, two heads work simultaneously.

Control panel — used to switch between notch profiles and start automatic cycles. Newer models use touch screens, lowering the operating barrier further.

The actual sequence is straightforward: a stringer is fed in and pushed against the stops, clamps secure the wood, the notching heads activate and complete the cuts, the stringer is removed, and the next one is fed in. Automatic models run this cycle continuously, with the operator only handling loading and unloading.

Notch Shapes and Adjustability

Notch shape depends mainly on pallet design. Common profiles include the “C” notch, where a full section is removed from the stringer, and the “L” notch, which leaves a lip or tab. Different profiles correspond to different forklift entry methods and load requirements.

Adjustability covers three areas: notch width, notch depth, and notch position. Mechanical adjustments or programmed settings handle these changes. For factories that switch pallet specs frequently, a machine that adjusts quickly is more practical than one that only runs fast on a single spec.

Wood Pallet Notcher Machine

Choosing Between CRS-1G and CRS-2G

A spec sheet alone does not tell you which model to pick. But once the numbers are translated into production scenarios, the decision becomes clear.

ItemCRS-1GCRS-2G
Capacity400–500 pcs/h1800 pcs/h
Power18kw 380v30kw 380v
Dimension1100×1000×1100mm2000×1200×1600mm
Weight300kg600kg
Groove depthLess than 45mmLess than 45mm
Groove widthLess than 230mmLess than 230mm
Max board length1300mm1300mm
Board height80–100mm (customizable)80–100mm (customizable)

Capacity gap defines the machine’s role. CRS-1G runs 400–500 pieces per hour; CRS-2G runs 1800. That is roughly a fourfold difference — not just “a bit faster,” but two different production scenarios. CRS-1G suits small-batch, multi-spec, fluctuating-order factories. CRS-2G suits single-spec, high-volume continuous production.

Power and footprint reflect installation requirements. Both 18kw and 30kw are 380v industrial power. The lower rating places less demand on shop electrical capacity; the higher one requires confirming your distribution capacity. Dimensions and weight directly affect layout, floor loading, and how the machine is moved. At 300kg, a forklift can reposition it. At 600kg, it needs a fixed installation spot.

Groove and board specs are hard limits. Groove depth under 45mm, groove width under 230mm, max board length 1300mm, board height 80–100mm customizable. If your stringers fall outside this range, the standard model will not work and you need a custom build. The fact that groove dimensions and board height are listed as customizable means the manufacturer accepts non-standard orders — for factories running special pallet specs, this matters more than the standard numbers themselves.

One gap to note: the parameters do not list a standard range for stringer width and thickness. These are also must-confirm items during selection, so verify them directly with the manufacturer.

pallet stringer notcher icon

Choosing Between CRS-1G and CRS-2G

Consistent notch geometry — machine-cut notches hold far tighter tolerances than manual cuts. During assembly, stringers fit more tightly with deck boards and blocks, producing a more stable pallet overall.

Faster production — automated notching runs at a speed manual cutting cannot match. Double-head models are especially suited to large orders, with significantly higher output per hour.

Less operator fatigue — manual notching means repeatedly handling heavy saws, which is both strenuous and error-prone. The machine does the cutting; the operator handles loading, unloading, and monitoring.

Better material utilization — precise notching means the groove is sized to the functional requirement, not oversized or misaligned. Over time, the wood saved adds up to real cost reduction.

Safety — modern notchers come with guards, emergency stop buttons, and sensor systems. Operators cannot touch the blades during operation, greatly reducing accident risk.

Flexibility — groove width, depth, and profile can all be adjusted per order. One machine can cover multiple pallet specs, avoiding the need to buy a separate machine for each design.

Selection and Maintenance Points

If your factory mainly produces a single American-style pallet spec, a double-head automatic notcher like the CRS-2G is the most efficient choice. If orders are varied and batch sizes are small, the CRS-1G or an easily adjustable single-head model is more suitable — focus on changeover time.

On maintenance, daily upkeep is not complicated: clean wood chips, lubricate moving parts, and inspect blade wear. Modular designs make blade changes and repairs easier, cutting downtime.

Do not compromise on safety devices. Guards, emergency stops, and automatic protection are basic requirements. Confirm how these devices actually perform rather than just reading the spec sheet.

Related Products

Get In Touch With Us