Mesh belt dryer

What Is A Mesh Belt Dryer?

Mesh belt dryer is a batch type, continuously working drying equipment. Mesh belt dryer is usually used to dry various briquettes, such as coal briquette, mineral powder briquette, iron powder briquette, fluorite powder briquette. Moisture content after drying could reach 5% below (moisture content is adjustable by the control system). It is widely used and an important equipment in briquette production line. Also, we could use mesh belt dryer of stainless steel to dry cassava chips, fruits, vegetables, medicine, food, etc.

Mesh belt dryer has features with high efficiency, high capacity, high evaporation strength, standardized production. We could increase the segment according to the capacity. Mesh belt dryer has a high efficiency for the materials that request low moisture content. We could supply customization service according to the client request. The main heating mode is electric heating, steam heating, hot air heating, Materials that are processed by mesh belt dryer are easy to store and transport. Mesh belt dryer is energy-saving and environment-protecting equipment that creates a good economic benefit and social benefit.

wood chip Mesh belt dryer

Technical features of mesh belt dryer

The belt dryer machine is mainly composed of a box, mesh belt, transmission device, feeding and distributing equipment, air inlet duct, moisture discharge duct, fan, heat source equipment, conveying equipment, control cabinet, etc.

  • Durable mesh belt material:
    Imported PET woven mesh belt is used, which has high transportation and ventilation efficiency, and the drying efficiency is increased by more than 25%. The dried materials will never be damaged or deformed.
  • Circulating hot air:
    The drying hot air in the drying section adopts left and right directions and up and down convection circulation. Therefore, the material particles are dried evenly up and down, left and right, and the moisture error rate is within 2%. The dry hot air is recycled and utilized to greatly improve the heat exchange efficiency and save a lot of steam energy.
  • Precisely control the moisture content of the material:
    The drying time is adjusted steplessly by frequency conversion, making it easy to control the moisture content of the product to within the standard range. The distributor adopts a swing distributor, which ensures uniform distribution and good moisture uniformity.
  • Strong heat exchange function:
    The mesh belt dryer heat exchanger is equipped with a high-efficiency drain valve to effectively remove air and condensed water in the steam pipe. After the steam pipe (air, condensed water) is removed, the heat exchange function can be improved by 10%.
  • Automatic temperature control system:
    According to user needs, an automatic temperature control device is optional. The drying temperature control adopts a microcomputer PID automatic temperature control system, combined with a proportional pneumatic control valve, and the temperature control is accurate with a plus or minus error of within 3°C.
    After the temperature is set, the steam volume is automatically adjusted to effectively stabilize the moisture content of the finished product and reduce unnecessary steam waste during the production process.

How does a Mesh Belt Dryer Work?

The main working principle of the mesh belt dryer is to evenly spread the material on the mesh belt, and drag by the transmission device in the dryer to move back and forth. Hot air flows through the materials, and water vapor is discharged from the wet hole, so as to achieve the purpose of drying. The mesh belt is made of a 12-60 wire mesh belt, and the box length is composed of standard sections. In order to save the site, the dryer can be made into multi-layer, the common ones are two rooms with three floors and two rooms with five floors, the length is 6-40m, and the effective width is 0.6-3.0m.

Materials do into the dryer from the head slowly through drying. The mesh belt speed can be determined according to the type of material and its water content. The airflow in the dryer adopts negative pressure and porous air intake, which can ensure the effective drying area, evenly distribute the wind speed in the airflow and improve the drying effect. In order to get the best drying effect and the appropriate output, the material moisture content, the speed of the mesh belt, air volume and air temperature must be in an appropriate, reasonable and organic combination.

Mesh belt dryer

Benefits Of Using Mesh Belt Dryer

1.High drying efficiency, good drying effect.

Mesh belt dryer is continuously working drying equipment, used “feeding at one end and discharging at the other” method for drying materials. Due to the special design on the inside structure of mesh belt dryer, mesh belt dryer has a high drying efficiency. We could control and adjust the final moisture content to client request.

2. Energy-saving, environment-protecting, no pollution, no noise.

Mesh belt dryer could dry coal briquette, mineral powder briquette, mill scale briquette and food, medicine, vegetable, fruits, etc. This improves the resource utilization. Due to the special design of mechanical structure and electricity control, mesh belt dryer works at a low power. Also, mesh belt dryer is equipped with multistage dust collecting equipment to meet the national standard of environment protection. Reduce the environmental pollution from equipment; it is a kind of good energy conservation and environmental protection equipment. Our mesh belt dryer adopts enclosed structure; no air pollution and noise pollution will be happened during drying process.

3. Wide application range, low request for the working environment.

Mesh belt dryer is applicable for every country in the world. We could make some adjustment according the different situation in different countries, such as voltage, engineering design requirement, geographical conditions, etc. As to the working environment, Mesh belt dryer could work normally in severe cold, high temperature, plateau, etc.

4.Simple installation.

Mesh belt dryer could work directly on horizontal hardened site. In the running, no vibration happens. It is also convenient to transfer and transport the equipment.

5. Few workers, simple operation, easy maintenance.

To client request, we could provide semi-automation and total automation production line. Only regular maintenance to the instruction is needed. It is very convenient to maintain.

6.High safety.

The transmission parts all adopt enclosed or semi-enclosed design to the equipment standard of security, such as transmission shaft, motor, belt pulley, etc. This ensures the safety of equipment and workers. And belt dryer is equipped with observation platform and sight hole to ensure the safety of equipment and workers.

Get In Touch With Us