Wood Sawdust Glue Mixer Machine

Wood Sawdust Glue Mixer Machine

  • Motor Power :7.5kw
  • Axis Materials: 4.5# steel
  • Mixing time: 1-3 minutes/time
  • Rotate Speed: 2960 cycle/min
  • Working Capacity : 1800kg/ hour
  • Application : Glue mixing machine is used in wood pallet making machine process and wood pallet block production line. It applies for mixing the dried raw material wood shavings with glue.
Share This To

Product Description

The glue mixing machine is a machine developed by our factory for the production of environmentally friendly compression sawdust pallets. It plays an important role in the wood chip pallet production line.

The proportion and uniformity of the mixed glue directly determine the quality of the pallet. The structure of the glue mixing machine is relatively simple, and the production process is not complicated. Inside the machine, there is a shaft with blades that rotates in a cylinder or groove. This shaft is connected to a speed-regulating motor, so the speed of the shaft can be adjusted. Adjust the speed of the motor according to the size of the sawdust particles and the amount of glue, so that the glue and sawdust can be mixed more evenly.

Wood Sawdust Glue Mixer Machine

Working Principle of Glue Mixer Machine

Ring glue mixer machine is mainly composed of the mixing tube, stirring shaft, glue supply system, feed inlet, outlet port, cooling system and other components.

Ring glue mixer machine is used before start presswood pallet making machine during wood pallet production line, and is also used before making pallet block in pallet block making machine. Raw materials are entering into the glue mixer machine continuously, from the feeding inlet after the measurement. Under the action of feeding shovel, raw materials accelerate motion along the circumferential direction, forming a ring body, and gradually run to the sizing area.

The glue is pouring into glue mixer machine along the tangential direction, stirred by the stir claw, so that the glue is mixing with the raw materials adequately. As the raw material distributed radially with different line speed and there is a big speed difference, so friction between the raw material, to achieve uniform sizing effect.

Product Parameters

Product NameGlue mixer
Motor Power7.5kw
Working Capacity1800kgs per hour
Mixing time1-3 minutes/time
Rotate Speed960cycle/min
Axis Materials4.5# steel
Appearance Dimension1500*1000*1300mm
Weight300kg

Features of Glue Mixer Machine

  1. Easy operation. One person can operate it, and also full automatic production process is available.
  2. Small land occupation. Glue mixer machine of small pallet block production line just occupies approximately 1 m2, meanwhile, covers a little land during large wood pallet making machine line.
  3. High efficiency. Glue mixer machine adopts reasonable structure design to stir glue with raw material evenly.
  4. Stable performance, better quality, and low consumption.
  5. Save materials, and low labor and maintenance cost.
  6. Durability and solidness. Glue mixer machine is made of high quality steel, and is not easy to rust and deformation.
  7. Customization is available according to the requirements of the clients.

Advantages of Glue Mixer Machine

This equipment is mainly used for the process of molding wood chip pallets. Use waste materials such as wood shavings and wood chips to produce pallets after mixing with glue. This new type of glue mixing machine solves the problem that the traditional machine can not continuously feed and mix the glue, the glue is not uniform, and the meter can not be measured when discharging.

This glue mixing machine has the advantages of uniform glue mixing, fast speed, and continuous operation. It can be widely used in molded pallet production lines. This glue mixing equipment has a simple structure and convenient operation. The sawdust pallet produced after mixing the glue is strong and environmentally friendly. At the same time, it can also be used for mixing glue of other materials, which has broad market prospects.

Application of Glue Mixer in Compressed Pallet Production Line

The wood enters the wood shredder after being chipped by the wood chipper machine. The wood chips are crushed in the wood crushing machine and then dried in the drum dryer machine. The dried raw materials need to be stirred and mixed evenly with environmentally friendly glue in the glue mixer. In this way, all the broken fibers can absorb a fixed amount of glue, and ultimately ensure that the finished fiber is tightly connected and the product quality can reach the highest strength.

Finally, the raw materials after mixing the glue are sent into the mold of the compression wood molding machine. Different sizes and patterns of molds can be used to mold different types of pallets using high-temperature and high-pressure technology.

Get In Touch With Us